In 
 
Order by: 
Available to: 
Price: 
 - 
$
9
Buy It Now
Free Shipping
Condition: Used
Location: Weirton,WV,USA
Kimberwick style English bit with smooth single jointed snaffle mouth measuring 5 1/4" wide. Stainless steel. Ring height 4" from top to bottom. ... moreThe shanks of this Kimberwick bit are slotted so that the reins can be attached either high or low. The lower slot creates more leverage apply the curb chain while the upper slot applies more pressure to the tongue and bars. The mouthpiece is a standard snaffle. Includes curb chain and hooks. Very clean excellent condition. Ready to use! From a smoke-free home with dogs and cats. Only the cat likes to help me. But I know those with allergies should know that a hair or two may be inadvertently packaged up too. NOTE- Please select the appropriate shipping option for you on the checkout page. Thanks! Save me as a favorite seller and check back often! Your package will be in the mail within 2 business days of cleared payment! If you won an auction please pay within THREE DAYS or item will be relisted! ~~~~PLEASE READ IMPORTANT INFORMATION BELOW!~~~~~ PLEASE REVIEW ALL PICTURES as they are a part of the item description– RETURN POLICY I accept returns within 14 days of the actual ship date(ship date is when the shipping company picks up the package) Return costs are buyer’s responsibility unless I grossly misinterpreted the item. If you decide you do not want the item. I do not refund your return shipping cost or my cost to ship to you! Refunds given as: money back for the item minus MY cost of shipping to you. The listings are as is/ as shown/ as described to the best of my ability. I strive to provide accurate descriptions and measurements. PLEASE take the time to go over the measurements to ensure proper fit and ask any questions about color if that is a great concern to you. Computer monitors are all different so what I see in color on mine may be different than what you see. Please ask questions. The item has to be in its original condition in order to qualify for a refund. PLEASE READ ALL DETAILS THOROUGHLY- IT'S YOUR RESPONSIBILITY. If you are unsure abou
$
28.95
Buy It Now
$0 Shipping
Condition: New
Location: Dunnellon,FL,USA
$
19.95
Buy It Now
$8 Shipping
Condition: Used
Location: San Rafael,CA,USA
$
34.95
Buy It Now
$8 Shipping
Condition: Used
Location: San Rafael,CA,USA
$
25
1h 22m 32s
0 bids
$0 Shipping
Condition: Used
Location: Saint Albans,WV,USA
$
29.95
1d 1h 34m 32s
0 bids
$0 Shipping
Condition: New
Location: Stafford,TX,USA
$
15
Buy It Now
Free Shipping
Condition: Used
Location: Liverpool,NY,USA
$
19.95
Buy It Now
$8 Shipping
Condition: Used
Location: San Rafael,CA,USA
WONDERFUL OLD WEYMOUTH BIT MADE IN ENGLAND 5.25 MOUTH WITH WITH A LOW PORT AND 6" SHANKS GOOD CONDITION FOR AN OLDER BIT. ONE SHANK A BIT BENT. I.
$
24.95
Buy It Now
$8 Shipping
Condition: Used
Location: San Rafael,CA,USA
$
28.8
Buy It Now
$7.9 Shipping
Condition: New
Location: Gardiner,NY,USA
$
89.95
Buy It Now
$7.95 Shipping
Condition: New
Location: Galesburg,MI,USA
$
22
Buy It Now
Free Shipping
Condition: Used
Location: Sewanee,TN,USA
$
26.9
Buy It Now
$6.9 Shipping
Condition: New
Location: Gardiner,NY,USA
$
42
Buy It Now
$0 Shipping
Condition: New
Location: York,PA,USA
$
17.57
Buy It Now
Free Shipping
Condition: New other (see details)
Location: Mansfield Center,CT,USA
$
16.69
Buy It Now
Free Shipping
Condition: New other (see details)
Location: Mansfield Center,CT,USA
$
24.99
Buy It Now
$6.9 Shipping
Condition: New
Location: Gardiner,NY,USA
$
20.99
Buy It Now
Free Shipping
Condition: Used
Location: Adairsville,GA,USA
$
19.99
Buy It Now
$8.75 Shipping
Condition: Used
Location: Scottsdale,AZ,USA
$
49.43
Buy It Now
$0 Shipping
Condition: New
Location: Beloit,WI,USA
$
6
Buy It Now
Free Shipping
Condition: New
Location: Newburgh,IN,USA
$
21.97
Buy It Now
Free Shipping
Condition: New other (see details)
Location: Mansfield Center,CT,USA
$
65
20h 23m 35s
0 bids
$12 Shipping
Condition: Used
Location: Bristol,WI,USA
$
29.99
9d 5h 38m 35s
0 bids
Free Shipping
Condition: Used
Location: Smartville,CA,USA
$
37
Buy It Now
$0 Shipping
Condition: Used
Location: Belfair,WA,USA
$
29.95
Buy It Now
$0 Shipping
Condition: New
Location: Sugar Land,TX,USA
$
15
1d 22h 53m 49s
0 bids
Free Shipping
Condition: Used
Location: Newport,MI,USA
$
35.36
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
59.95
Buy It Now
$0 Shipping
Condition: New
Location: York,PA,USA
$
15
Buy It Now
Free Shipping
Condition: Used
Location: Kaysville,UT,USA
$
28.8
Buy It Now
$6.9 Shipping
Condition: New
Location: Gardiner,NY,USA
$
20
Buy It Now
Free Shipping
Condition: Used
Location: Jasonville,IN,USA
$
35
Buy It Now
$8 Shipping
Condition: New
Location: Jasper,MO,USA
$
19
Buy It Now
$0 Shipping
Condition: New
Location: Bucyrus,KS,USA
$
38.95
1d 1h 2m 40s
0 bids
$0 Shipping
Condition: New
Location: Stafford,TX,USA
$
16
Buy It Now
$9 Shipping
Condition: Used
Location: Auburn,AL,USA
$
31.95
1d 1h 56m 47s
0 bids
$0 Shipping
Condition: New
Location: Stafford,TX,USA
$
74.95
Buy It Now
$8.95 Shipping
Condition: Used
Location: Scottsdale,AZ,USA
$
29.95
1d 1h 41m 40s
0 bids
$0 Shipping
Condition: New
Location: Stafford,TX,USA
$
26.95
Buy It Now
$0 Shipping
Condition: New
Location: Sugar Land,TX,USA
$
35
Buy It Now
Free Shipping
Condition: Used
Location: Sewanee,TN,USA
$
60
Buy It Now
$0 Shipping
Condition: New
Location: York,PA,USA
$
44.27
Buy It Now
$0 Shipping
Condition: New
Location: Beloit,WI,USA
$
41.5
Buy It Now
$0 Shipping
Condition: New
Location: York,PA,USA
$
12
Buy It Now
$8.5 Shipping
Condition: Used
Location: Kent,NY,USA
$
20
Buy It Now
Free Shipping
Condition: Used
Location: Erie,PA,USA
$
18.5
Buy It Now
$0 Shipping
Condition: New
Location: West,TX,USA
$
29.34
Buy It Now
$0 Shipping
Condition: New
Location: Beloit,WI,USA
$
76.5
Buy It Now
$0 Shipping
Condition: New
Location: Hazleton,PA,USA
$
31.95
Buy It Now
$0 Shipping
Condition: New
Location: Sugar Land,TX,USA
$
45
Buy It Now
$0 Shipping
Condition: New
Location: Loveland,CO,USA
$
22.45
Buy It Now
Free Shipping
Condition: New
Location: Indianapolis,IN,USA
$
23.95
Buy It Now
$0 Shipping
Condition: New
Location: Dunnellon,FL,USA
$
23
Buy It Now
Free Shipping
Condition: Used
Location: Newport,MI,USA
$
24.99
4d 18h 23m 7s
0 bids
Free Shipping
Condition: Used
Location: Franksville,WI,USA
$
24.99
3d 21h 19m 47s
0 bids
Free Shipping
Condition: Used
Location: Franksville,WI,USA
$
50
Buy It Now
$7.95 Shipping
Condition: Used
Location: USA
$
18
Buy It Now
$0 Shipping
Condition: New
Location: Ruffs Dale,PA,USA
$
24.95
Buy It Now
$5.95 Shipping
Condition: Used
Location: Richland,MI,USA
$
75
Buy It Now
$13.5 Shipping
Condition: Used
Location: Newmarket,NH,USA
ANTIQUE/ VINTAGE MADE IN ENGLAND NEVER RUST WEYMOUTH HIGH CURB ENGLISH BIT Description BUY IT NOW! Or make a serious offer! Attention collectors. Show ... moreexhibitors! This is a vintage Weymouth bit Made in England by Never Rust. New bits from Never Rust retail for $120.00 and up nowadays. This bit is unusual in that the curb is higher than is typical of most Weymouth bits at 1-3/8" high. The close up photos show the makers mark on the back side of the mouthpiece. This is a very well made bit with a 3/8" diameter x 5 inch mouthpiece with a 7-1/2 inch shank and weighs in at 14 ounces. This is a handmade bit and has a wonderful patina that can only come from age. This stunning bit is in very fine condition for it's age and will make a great addition to your show bit collection or will look great in any show ring setting. Thank you for viewing my auctions! I will leave feedback after receiving feedback from buyers as confirmation item has been received. Payment Payment is due immediately following end of listing. Shipping: International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I can not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. 25% Restocking Fee charged on all Returns. Packaged items returned must be in same unopened condition as shipped by seller. And all returned items must match the condition of all listing photos with no signs of use or wear.
1 2 3 4 5 6 7 8 9 10
 In 

Past Items  
 
Up for auction is a used Tom Thumb snaffle copper mouth bit. Also. A NEW curb bit. Both are horse size. thanks for looking and happy bidding I'm sorry shipping has to be so high. Any packages over a pound are charged a lot. Shipping price includes delivery confirmation.
Vintage WWI US Calvary#3 Y&T Horse Bit/Bridle. The Leather on the Bridle is in Poor condition and does have some damage. The Bit is marked#3 US and Y&T on the side. Any quesitons please e-mail. Thanks for looking Check out my other items! I DO COMBINE SHIPPING WITH ALL THE ITEMS I LIST. SHIPPING CHARGES ARE THE TOTAL OF THE PURCHASES PLUS THE HIGHEST SHIPPING CHARGE FOR ONE OF THE ITEMS PURCHASED. THEN THE ITEMS WILL BE SHIPPED TOGETHER AS SOON AS THE PAYMENT IS RECEIVED.
This is a lightly used silver mounted short shank curb bit made by Sam Jenkins. Sam is a well-known bit and spur maker from Texico. New Mexico. Sam is listed in Old Cowboy Saddles and Spurs by Gretchen& Mike Graham. It is marked Sam inside one cheek piece and with the number 466 inside the other cheek piece. The cheek pieces are steel and are just beginning to freckle. They are mounted with ten pieces of engraved nickel silver. It has a sweet iron ported mouth piece. The bit is not bent. Broken, or repaired. This would be a nice bit to use or to add to a collection. Measurements: Mouth Piece– 5” Cheek Pieces(measured from the end to end of each ring) 5 ¼” Port Height(measured from top of port to bottom of mouth piece) 2 1/8” Bars Diameter– a little over ½” Bit Weight in Ounces– 11.3 Powered by The free listing tool. List your ... moreitems fast and easy and manage your active items.
Description Beautiful vintage*Vogt marked hand engraved curb bit. With stunning rope edge hand engraved sterling silver conchos that graduate along each shank-the largest being approx 2" across. It has a 5" sweet iron mouthpiece and copper inlaid bars; t he cheeks are approx. 8" long and the headstall rings ever so slightly flaired. It could use some polish as this is the first time it has seen the light of day in many years. So the patina is very dark in spots but this way you can choose how much to polish it; also the black patina definately helps denote quality. It is in excellent. Near mint for having been used, I do wish to point out that the 3rd concho up from the bottom, on the near side(left) shank, has a very slight impression off to one side. I didn't initially see it, I can ever so slightly feel it; I don't ... morebelieve that it shows up at all in the photos but wanted to be sure to mention it. This is a stunning bit which can go right to the arena or grace your collection-it will definately turn heads. No Reserve! Please note: If you have a slow internet connection or ebay is experiencing high volumes. You may need to allow a little extra time for the ample photos to load. Payment due in 7 days from auction end- unless you are planning on bidding on other items and wish to combine shipping-in that case please wait for my final invoice. Thanks for looking and check out my other pieces of vintage show equipment including headstalls. Reins and other using gear.
A LITTLE DIFFERENT TWIST ON THIS ONE. THREE( 3) HALLMARKS. FOUND IN OLD BARN IS A NO RTH& JUDD ANCHOR BRAND SWEE T IRON COW PON Y BIT. SOMETHING ON THIS I'VE NEVER SEEN BEFORE IS THE ANCHOR BRAND STAMPED ON ALL THREE PIECES. BOTH CHEEK S AND THE MOUTH PIECE. VERY UNUSUAL. NOT BEING A COLLECTOR MYSELF. I DON'T KNOW WHAT THE BOOKS SAY, BUT I' VE SEEN MANY OF THESE OVER THE YEARS. IN ADDIT ION I'VE HA D SEVERAL OF THEM AS WELL. IT'S THE ONLY ONE L I KE THIS I'VE EVER CAME AC ROSS. I HAVE ADDED THE REINS AND CURB TO IT. SOLID BRASS U.S.A. BUCKLES. COLLECT AND DISPLAY OR USE. IN GOOD WORKING CONDITION. NO RESERVE ON THIS ITEM PER EBAY RULES BUYERS HAVE(4) four DAYS FROM AUCTIONS END TO PAY WITH PAYPAL AND PAYPAL ONLY BUY-IT-NOW MUST BE PAID IMMEDIATELY WITH PAYPAL AND PAYPAL ONLY OR ITEM WILL BE RE-LISTED RETURNS ARE ... moreACCEPTED FOR FULL REFUND IF ITEMS ARE NOT AS DESCRIBED
Estate found. It is missing a hook on one side of the chain as shown.The only mark I can find on it is US. I cannot find any makers marks but may possibly be I don't know where to look. The bit is rusty so other marks may not be evident. Some that I have sold out of this same lot were marked BTC but US is all I can find on this one. I am not an expert so may have left out some details that are important to collectors. If so please feel free to email me. Thank you! READ
Horse Bit This is a used. Older horse bit with some silver inlays on shanks. I do not know if it is real silver. Bit was in use on a horse and has no sharp edges or rough spots. I suppose it could be used on a horse again but the shanks are a little bent or turned out making it not so balanced. A neat looking piece of deco or collectible nonetheless. I do not see a maker stamp on it- yet it appears to be older and not a cheezy import. I have more bits listed and more coming- and I am happy to combine shipping and load a bunch of this neat little stuff in a flat rate box! Thanks for looking and Happy Trails! Terms and conditions: Please ask any questions needed to make your determination. As all sales are final. I’m always happy to answer questions. I will ship promptly! I know I like getting my treasures quick! Check out my feedback and buy ... morewith confidence. Always happy to combine shipping with my other auctions! Shipping: USA: $5 via USPS Priority with Tracking Canada& International: actual ship cost only from zip 85387 in Arizona– can ship in a legal flat rate envelope via Priority International or in First Class weighing less than 4 pounds if rate is better. INTERNATIONAL BUYER NOTE: Buyers are responsible for any customs fees. Taxes etc. as mentioned in ebay terms. Payment: Paypal only– immediate payments appreciated and payment expected no later than 3 days after the auction has ended.
Very good Bit Master bit. Marked BM on one shank. All moving parts move freely. NO bends. Cracks or repairs. Nice patina of rust on the mouth
Beautiful silver show bit. Westeen pleasure curb light weight aluminum engraved shanks with copper mouthpiece and a medium port.5 inch mouthpiece and 8 inch shanks feom top to bottom. Paypal only please olease see my other listings for quality silver headstalls and show gear. Posted with
This is a vintage solid shank sterling silver mounted curb bit marked with the Crockett Renalde mark on the port. Crockett is listed in Bit and Spur Makers in the Texas Tradition by Ned and Jody Martin and Kurt House. This bit is style No. 1728 as shown in the Crockett Renalde Crockett& Kelly catalog No. 65 on page 9. The bit is steel mounted with engraved sterling silver in the shape of a diamond back rattlesnake down each cheek piece. There is some flaking on the black finish and rust on the steel. The bit is not bent. Broken, or repaired. This would be a nice bit to add to your collection or it could still be used today. Measurements: Mouth Piece(measured between cheek pieces) 5” Cheek Pieces(straight across end to end of each ring) 7 ¾” Mouth Piece Diameter– a little less than ½” Port Height(from bottom of mouth piece to ... moretop of port) 1 ½” Bit Weight ounces- 11.7 Powered by The free listing tool. List your items fast and easy and manage your active items.
ITEM: VINTAGE NO RUST 4 RING ENGLISH CURB HORSE BIT MADE IN ENGLAND CONDITION: VERY GOOD. MEASUREMENT: APPROX. 7 1/2" LONG X 5" WIDE(INSIDE MEASUREMENT) PLEASE VIEW ALL PHOTOS AS THEY ARE A PART OF THE DESCRIPTION Check out my other items! Be sure to add me to your favorites list! Sign up for PayPal; the fast. Easy, and secure way to pay online. Powered by The free listing tool. List your items fast and easy and manage your active items.
Good all original marked bit. Marked McChesney on outside of shank- see picture 1. This bit has a low port and a 5 and 1/4 inch wide mouthpiece. Bit is all original without any breaks or repairs and is not bent. Both shanks of bit are engraved and mounted the same. This is the only curb bit I have seen that is engraved fully along the shanks jn this pattern and has the McChesney mark there. Very unique engraving pattern on this bit. Very rare bit in my opinion. This bit was purchased from an estate collection that came out of South Dakota. Some small rust showing through the plating in places. Thanks for lookin and biddin and I will take any form of payment. oldcowboycollectibles.com Always cheap shipping.
This is a used handmade loose cheek curb bit made by Bill Homer from Groom. Texas. Bill started building bits and spurs full time in 1994. The bit is marked Homer inside one cheek piece and numbered 116 03 inside the other cheek piece. Bill is listed in Bits& Spurs Motifs. Techniques and Modern Makers by Ned& Jody Martin. The bit is steel and the steel is beginning to freckle. It is mounted with nickel silver on the rings and the cheek pieces are mounted with a brass flower with nickel silver scrolls and leaves. It is not bent. Broken, or repaired. This would be a nice bit to use or to add to a collection from a very collectible maker. Measurements: Cheek Pieces(measured from end to end of each ring) 8” Mouth- 5” Mouth Bars Diameter– 7/16” Port Height(measured from top of port to bottom of mouth piece) 1 ½” Bit Weight in Ounces- ... more16 Powered by The free listing tool. List your items fast and easy and manage your active items.
I'll let the pictures do the talking on this bit. What I know is bit is 30 years old at least. I measured 5-1/2 mouth and 7 inch shank from bridle loop to rein loop. Curb loop for chain. Copper mouth. X's on shank. Posted with
This is a lightly used handmade sterling silver mounted solid shank curb bit made by bit and spur maker Bill Helm from Carson City. Nevada. The bit is marked BH inside one cheek piece and numbered 19 on the port. The bit is steel and originally had a dark iron finish and is beginning to develop a natural patina. It is mounted with ten pieces of engraved sterling silver. The back of the port is inlaid with copper stripes. It is not bent. Broken, or repaired. This would be a nice bit to use or to add to a collection from a very collectible maker. Measurements: Cheek Pieces(measured from end to end of each ring) 7 9/16” Mouth(measured between cheeks) 5” Mouth Bars Diameter– 7/16” Port Height(measured from top of port to bottom of mouth piece) 1 7/8” Bit Weight in Ounces– 11.3 Powered by The free listing tool. List your items fast and easy and ... moremanage your active items.
This is a used western vintage bit. The measurements are approx mouth 4 7/8 with a 8 inch shank. the bit is metal with some rust. Copper inlay mouth. The shanks are sterling overlaid with engraving. I will leave the polishing to you. I didn't want to change the patina. Small concho decorates the side, no makers mark. Nice bit to use or add to a collection. Please ask questions before bidding. All sales are final. Some listing may end early if sold in the shop. Pictures are also part of this description, Please check the tape measurement for saddle size measurements along with the serial number on saddle sales. Any used or vintage leather product may have smells from being in a barn or from leather conditioner. I may be away from email a couple of days and will answer questions upon return. By bidding you also agree to the shipping and ... morehandling costs, packing materials, oversize double wall boxes on saddle sales, included in my shipping costs posted. Shipping outside the 48 states must agree to priority shipping. International buyers are responsible for import duties, taxes, charges that are not included in the item price or shipping charges. These charges are buyer responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding and buying. These charges are normally collected by the delivering freight shipping company or when you pick them up- do not confuse them for additional shipping charges. We do not mark merchandise values below or mark them as gifts US and International government regulations prohibit such behavior. Please don’t ask me to ship to your country if I don’t ship to it. Payment must be received within three days. Thanks for looking and Happy Bidding. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*55267%60%3E-13dd63cd57d-0xfc-
This is a great looking U. S. Army Military Horse Bit-it is in really good collectible condition-the bit is 8 in. long-4-3/4 in. wide mouth-1-1/2 in. high port-the iron even has a really good old patina to it-don't miss a chance to own this very nice antique bit.thanks for looking. 35dd,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*0%3C%3E35dd-13dd758a34b-0xf2-
You are bidding on a vintage Star Steel Silver English curb port bit. Has loose ring snaffle rings. 6" cheeks. Nickle silver finish has worn off. Otherwise in good condition. email questions.
IN THE TACK BOX FOR YEARS. Took it to the jeweler to verify and it is STERLING SILVER. Unique hand engraving. has low port. a beautiful bit. no dents in conchos. great VINTAGE Find. Good home important! GORGEOUS ENGRAVING. ANOTHER NICE TRANSITION BIT. RIDE. SHOW OR PLEASURE STERLING SILVER CONCHO BIT CURB BIT w/ SHANKS HAND ENGRAVED Shanks HAND ENGRAVED CONCHOS MOUTH PIECE 5 inches SHANKS are about 8 inches from top where headstall attaches to bottom where reins attach Beautiful engraving. excellent vintage condition. lots of BLING and a STANDOUT. I can COMBINE shipping if needed. thanks but please let me know you are still bidding before you pay. I am am listing starting at 1.00. please read description and ask questions before bidding. the description is detailed ENJOY BIDDING. QUESTIONS PLEASE ASK. I want my buyers to be happy so please ... moreread the description and VIEW pictures. and then email me when your item arrives and let me know it is safe and you thrilled. OVERSEAS BUYERS. fees. tariff's.loss. or damage will be your responsiblity. 345e.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60%60%3E345e-13decc3a40f-0xfb-
Very nice Vintage Iron Curb Bit marked"CROCKETT" With Silver Engraved Buttons. Mouth measures 5 1/8" Cheeks are 8 3/8" long, and buttons measure 13/16" Bit has some pitting but in very good condition. Buttons have an engraved 4 point flower. And one of the buttons has a slight indentation(view close-up photo) This is a very nice bit. This item is from an estate of a long time Western/Cowboy Memorabilia Collector and we have been asked to sell some of his items on EBay by his widow. Please view all photos carefully. And ask any question you might have. Because I do not except returns. All items are sold"as is" Items I sell will be old. Vintage or used, unless otherwise specified, and will not be perfect. I will give the description as accurate and honest as possible. I want all buyers to be satisfied, so ... moreplease email me before negative feedback, so any problem can be solved. I only accept PayPal for payment, and payment must be made within 4 days of item being sold, unless special arrangements have been made. Items will be mailed as quickly as possible after payment is received and has cleared through PayPal.
Vintage Crockett Curb Bit with stabilizer made of bronze. Sides are engraved-see pics. Lightweight aluminum. Crockett is stamped on inside of shank.
Model 1874 U. S. Cavalry Horse's Curb Bit. It is also called the"Shoemaker" Named for its designer Captain William R. Shoemaker O.S.K. of the U.S. Ordnance Department. This is a used bit some surface rust no pitting. 5v.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw72shq%3E5v-13dfdeb2813-0xf4-
This is an antique Model 1859 Cavalry Curb Bit. This particular bit is considered to be a"later" version of an M1859. Because it is a M1859 that was made between the years of 1863- 1865. The"earlier" M1859s of which were made in the years of 1859-1862 had a more elongated lower branch and the lower branches on those earlier M1859s were also a little lighter in substance. The bit has two U.S. brass bosses, one on each side. The bit has a blackish finish to it and you can see in the pictures where some of this black finish is also on some areas of the brass bosses. There are a lot of areas on the bit where the underlying rusty color is showing thru, as can be seen in the pictures. Aside from the black coloring. The bit is in really good order for being made in the 1860s. Both of the brass U.S. bosses are firmly attached, ... moreas is the lower slobber bar. The structure of the bit is solid, there are no cracks and there have been no repairs. The mouth-piece measures a hair under the 4 3/4" line. One side piece is 8 1/2" long and the other one is a 1/16 of an inch shorter. This antique Military bit is being sold"no returns" and I'll be happy to answer any questions. Bidders from the U.S. only please and payment would be appreciated with-in 4 days after the auction ends. Thank-you.
Here I offer a beautiful stainless steel show bit with copper curb mouth. The shanks of this bit are engraved with leaves. It is maker stamped on the inside of BOTH shanks. One side is"Partrade" and the other side is"Metalab"see photos) The mouth measures a tad under 5 1/2" and the shanks measure 8 1/2" in length from the edges rein end to headstall end. Used very little. Has minor surface scratches inside the shanks. This is a wonderful bit to use in the show ring. On your parade bridle or to add to your bit collection. The leaves on the shanks are molded into the steel and not just etched in. Please look at all photos for the detailing. Reserve is lowest price I will take for this item. I prefer Paypal for payment. Payment is due within 3 days of auction end. Buyer is to pay extra for shipping. I will accept ... moreUSA bidders only and will ship USA only. I will email you when payment is recieved and the bit is on the way to you. Please check out my other auctions.
Up for bid. An Authentic Les Vogt High Port Western Curb Horse Bit. The Bit is in good condition with no cracks. Breaks or repairs. It has a 5" mouth, 1 3/4' port and 8 1/2" cheeks. The bit is marked MAKER 01828? and signed Les Vogt. ck pic's) Perhaps this is what your searching for! We make every attempt to describe all items to the best of our abilities. Measurments are approximate and not always exact. We strive to sell items that are in excellent. Like new, gently used condition unless otherwise noted. If there is a problem that we may have overlooked, or did not note in the description, please contact us within 3 days of receipt to discuss resolution, otherwise all sales are final. If you have a shipping preference, let us know within 24 hours of winning bid and we will ship as you desire. We will combine shipping, ... moreplease email us if you have any questions. Town is 30 miles away, so package's are mailed once a week, usually on Fridays. Thank you for looking. good luck. No reserve.
Vintage bits and spurs with silver. Most are 55 plus years old and made in Southern California. I did not clean. Wipe, mend or mess with any of the items. They are sold as is. I found no breaks or bad spots ~ Nite: The headstalls and curb straps are OK not much value. There is wear on this equipment as they are all used cowboy bits or spurs. All are in working order or great for decoration. I have a big lot of vintage bits. Some I left the leather headstalls on with chin straps. They are OK nothing special but may be useable. I will combine shipping if more than 1 lot is won. Check my other offers too! They will all clean up nice! Lot#4) Silver handmade bit. Includes headstall! This is a nice handmade broken curb bit with a 2 inch port. The bit is broken style(See photos) The shanks have a nice concho design that changes size as it decends ... moredown. The bit is also has a stamp on the inside of the shank but I could not tell what it says and the camera didn't pick it up. see photos and check the pictures for measurements) This is a real nice handmade bit. This lot comes with a one ear buck stitched leather headstall. Flat rate shipping box $ 7.00 I will combine shipping. E-mail me with any question before you bid. No returns on the bits or spurs so please ask before bidding and look at the pictures closely.
Untitled Document WESTERN COLLECTIBLE HANDMADE MARKED BIT BY PAUL LAMB. PAUL USED TO MAKE TACK FOR M L LEDDYS AND HIS WORK IS VERY NICE AND RARE. MARKED P L ON ONE SIDE OF THE SHANK AND#302 ON THE OTHER. EXCELLENT PATINA AND A GREAT CURB CHAIN. MEASUREMENTS ARE 7" AT THE CHEEK AND 5 1/4" AT THE MOUTH. IF YOU LIKE WHAT YOU SEE CHECK OUR OTHER LISTINGS. WE APPRECIATE YOUR TIME AND INTEREST. IF YOU LIKE WHAT YOU SEE.PLEASE CHECK OUR FEEDBACKS AND OTHER LISTINGS FOR MORE WESTERN COLLECTIBLES. THANKS FOR LOOKING!
Vintage sterling silver headstall with old curb bit. And rawhide romal reins. Leather headstall has buckstitching with sterling silver ferrules, horse head trim, buckles, and conchos. Buckles are marked Sterling. Leather has faint cracks but. Remains sturdy. Hand forged curb bit with sterling silver conchos. Silver needs cleaning I. Will leave that up to buyer. The braided rawhide is in good con dition. No breaks. There are crac ks on the leather popper. This is a very nice vintage bridle! Questions welcomed! Check out other items I have listed.
All 5 bits are in perfect working order. Including a almost brand new tom thumb! There is a curb, snaffle, rubber, tom thumb, and D ring kimberwicke bit. Even includes a bonus pair of soft leather reins, freshly oiled. The tom thumb alone sells for $20.00 else where.
hi this is another one of our wonderful barn sale finds: Decorative Old Used ~ Vintage 1~ old used SLIESTER-Curb BIT w coper Roller ~ bit lot#4 Western bits ~ BARN FIND horse curb bit ~ iron? steel? silver? No leather straps.Reins,bridle.ect. left the green patina on.new owner can clean or keep as is. just told this is" Sliester Surgical Stainless Steel" silver colored. Just great to use for wall hanger,decoration or cleaned up and use on your horse/ pony. bit measures approx: 5" across. 6" shanks. Rise 2 1/2" Overall 8 1/2" Light curb with copper roller cricket. maker marked SLIESTER-BIT registered trade mark stamp. free shipping please check out pictures ~ would make a great present for your cowboy.or cowgirl or to re-store. Rebuild, or for a store display for those western days.decorations we got this along ... morewith several other saddles/tack/ and misc. in box truck load at an estate barn sale. so they will be all sold" as is" will need a good cleaning.Shows,ware.ect. ask any questions BEFORE bidding! thankyou. Please ask all questions before bidding. All items must be paid for within 3 days or will be relisted.and feedback left. Sold"As is" All sales are final. no returns or refunds. would be great for Barrel Racing. Roping ~ Trail riding~ or with your favorite Western Saddle. ENJOY! NO RESERVE. PLEASE CHECK OUT OUR OTHER LISTINGS AS I WILL BE LISTING SEVERAL LOTS OF ROMANCE BOOKS. If you are looking for other GREAT Romance or Mystery Books. Please check my other auctions! all items sold"as is" ask any questions before bidding. thankyou! please check out pictures(if you need more we are happy to send them to you) UPS shipping(to 48 continental states) includes delivery confirmation + insurance. free shipping! ~*we reserve the right to end the auction early as we have this listed on craigslist as well for sale) would make a great present for your cowboy.or cowgirl or to re-store. Rebuild, or for a store display for those vintage western days. info on o
Vintage stamped crockett curb bit. In great shape. Any questions just ask. Thanks
Vintage stamped Ricardo stamped bit. In great shape. Rare bit. Any questions just ask. Thanks
Loose cheek bit. 5" cheek. 5 1/4" mouth with lots of curve in it, 1 3/4" tall square port. Eight pieces of engraved silver on each cheek. Natural patina. Marked" JT" on the port. Not bent. Broken or repaired. Shows very little use. NO RESERVE! $5 priority shipping. THANKS for looking.see my other auctions for more cowboy gear. Look at the pictures and ask any questions before bidding. I am not an expert in every area. You may know more about an item than I do. A lot of the items I sell are used. I try to use the best photos and descriptions that I can. My items generally sell"as is" unless I make a major mistake in the description. I will combine shipping on multiple items. SHIPPING IS TO U.S. ONLY unless prior arrangements are made. I will ship I will ship to Canada but shipping cost may be higher.
Vintage aluminum curb bit in very good pre owned condition. It has a 5 1/8" mouth and 8 1/2" cheeks from the rein hole to the top of the bridle ring. Made for rein chains. It was made for or once had a roller. It has a 2" port and is marked Don Ricardo. Please see all the pictures. They are a large part of the description. Please ask any questions prior to bidding. I will combine shipping if I can do so safely. Fragile items will mostly be shipped Priority. As the post office seems to think parcel post boxes are footballs! Local pickups are always welcome, as are international bidders. The vast majority of the items I sell are vintage and/or pre owned. I do not know what they have been exposed to or where they have been. They may have been around pets. Perfumes, chemicals, or smoke. I also often use recycled packing materials. ... moreIf you are highly sensitive to any of these things, I'd rather you not bid and end up unhappy. Thank you for viewing my auction and have a great day! Check out my! Be sure to add me to your! 2fiuqm.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bifc%3E2fiuqm-13e367d674e-0xf1-
Vintage Horse Mule Wagon Rusty Iron Snaffle& Curb Bits- Western Cowboy Decoration.Thanks for looking. 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13e4002a69a-0x105-
GENUINE CROCKETT"MONTE FOREMAN" STYLE VERSATILE LEVERAGE 8-1/2 INCH SHANK PELHAM CURB BIT BUY IT NOW! Or make a serious offer! This bit is a"Monte Foreman Versatile Pelham" in the style promoted by the late Monte Foreman. Monte Foreman was one of America’s foremost trainers of horses and riders. And many advances in western training have come from his years of research into the action and interaction of horse and rider—research aimed at improving their athletic ability as a team. It was Foreman who first applied still and motion-picture photography to the sport of riding, to determine beyond doubt how horses move most naturally and efficiently. His training methods are applicable to all kinds of western and English riding. This type of bit was promoted by Monte as"humane. Versatile, and efficient" and was supposed ... moreto encourage the horse to submit willingly to the bridle without pain. The diagram shown in the third photo shows the various ways Monte intended this bit to be used by the rider. This is a very heavy bit weighing 1 pound 5 ounces and appears to be a chrome plated copy made by the Crockett company as Monte marketed bits in stainless steel with shorter shanks. It features the name"CROCKETT" stamped in the center of the low wide curb port(2-1/2 inches wide by 1-3/4 inches high) that measures 5 inches wide by 3/8 inch in diameter. The shanks measure 8-1/2 inches long and the measurement to the center of the pelham rein is 3 inches. The Crockett bit and spur company was started in 1920 and sold in 1951 to James Renalde after Oscar Crockett's death in 1950. In 1984. The last of the stock belonging to the Crockett-Renalde Company was liquidated and the Crockett name is now part of Kelly bit and spur licensed by Libertyville Saddle Shop. This background information helps to potentially determine a date for the manufacture of this bit. This is a very unusual bit and is a great signed piece to add to your bit collection. Thank you for viewing my auctions! I will leave
HAND MADE MAKER MARKED RS GERMAN SILVER LOOSE SHANK BRIDLE MED CURB WESTERN BIT BUY IT NOW! Or make a serious offer! Attention collectors. Show exhibitors! For your consideration, a handmade maker marked German silver over sta inless steel loose shank medium height cur b bit. This engraved bit is absolutely stunning. And the engraved German silver is in amazing condition; the bit looks almost brand new. The close up photos of the top of the curb mouthpiece shows the maker's mark"RS" The bi t features a 1-1/2" high curb mouthpiece with co pper inlaid on the back of the bars as shown in the photos. Th is is a great bit for use by r einers and other workin g type horses featuring Loomis shanks allowing for two-reins if desired. The bi t shanks measure 8-1/2 inches long with a 3 inch purchase. The bit measures 5 inches wide ... morewith a 1/2 inch diameter mouthpiece and the cu rb is 1-1/2 in ches high. This great bit weighs in at 15.84 ounces. Thank you for viewing my auctions! I will leave feedback after receiving feedback from buyers as confirmation item has been received. Payment is due immediately following end of listing. International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I can not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior.
GENUINE HANDMADE MYLER USA STAINLESS STEEL SHOW BIT SWEET IRON WIDE CURB BIT BUY IT NOW! This is a hard to find super stainless steel show bit made by respected bit maker MYLER in the USA in the early 1990's with a rusted sweet iron wide port curb mouthpiece. Myler is now being made offshore by Toklat. So a bit like this is very difficult to come by now. This is a genuine collector's bit and the inside right shank is stamped with the US Patent number 5062255. The left shank is stamped with his maker's mark"MYLER USA" The swivel shanks measure 7-1/2 inches long and the mouthpiece is Myler's#16 mouthpiece and measures 5-1/4 inches wide by 3/8 diameter. The wide port sweet iron mouthpiece is shaped with a forward tip to perfectly fit your horse's mouth and provide tongue relief. The mouthpiece also features copper ... moreinlays to promote salivation and a responsive mouth. This bit is in very good used condition and weighs 11.32 ounces so it is a very nice light bit. This mouthpiece is considered by Myler to be a Level 3 bit for the following type of horse: Horse considered broke or finished; willing to obey commands Relaxed at the poll Possesses advanced skills. Works well off the seat, legs, and hands Don't miss out on the chance to add this great Don Hansen bit to your training and show collection THANK YOU FOR VIEWING MY AUCTIONS! I will leave feedback after receiving feedback as confirmation that item has been received. Multiple items purchased may be eligible for combined shipping discounts. Check out my other items! International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I can not m
ORIGINAL VINTAGE JIM TRAMMEL BUSTER WELCH ALUMINUM COPPER CURB CUTTING SHOW BIT BUY IT NOW! Or make a serious offer! Attention collectors. Show exhibitors! This is a GREAT hand made bit by Texas bit maker Jim Trammell in the Buster Welch cutter style. This bit is identified as an ORIGINAL VINTAGE Trammell bit by the HAND stamped makers mark"Trammell" on the inside left cheek: The ORIGINAL HAND STAMPED Joe Trammell bits"TRAMMELL" maker's marks were never struck clean. Newer production bits have deep machine made stamps. Hand stamping typically left partial or uneven letter depths as shown in the close up photos of maker's mark in this bit. This bit features a swept back polished aluminum cheek with a 1 inch diameter engraved floral concho with berry edge. This bit has 8 inch long cheeks. A 5 inch wide by 1/2 inch ... morediameter sweet iron mouthpiece. The purchase measures 2-3/8 inches in height. The bit weighs in a a light 9.98 ounces. The close up photos show the makers mark above on the inside of the left shank. There are a few wear marks on the both shanks. One on the right side below the ring where the bridle hangs and on the left side ring where the reins attach as shown in the close up photos. This stunning bit will make a great addition to your show bit collection and will look great in any show ring setting. Thank you for viewing my auctions! I will leave feedback after receiving feedback from buyers as confirmation item has been received. All sales are final! Payment is due immediately following end of listing. International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I can not mark me
GENUINE HANDMADE DON HANSEN DH STAINLESS STEEL SHOW BIT 5 INCH SWEET IRON LOW CURB BUY IT NOW! This is a very nice used stainless steel show bit made by respected bit maker DON HANSEN with a lightly rusted low curb mouthpiece. This is a genuine collector's bit and the back side of the right hand shank is stamped with his maker's mark"DH" as shown in the photos. The shanks measure 7 inches long and the mouthpiece is 5 inches wide by 7/16 inch in diameter. The bit weighs 8.6 ounces so it is a very nice light bit for a young or green horse moving from the snaffle to a shanked bit. Don't miss out on the chance to add this great Don Hansen bit to your training and show collection. THANK YOU FOR VIEWING MY AUCTIONS! I will leave feedback after receiving feedback as confirmation that item has been received. Check out my other ... moreitems! 25% Restocking Fee charged on all Returns. Packaged items returned must be in same unopened condition as shipped by seller. And all returned items must match the condition of all listing photos with no signs of use or wear. International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I can not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior.
VINTAGE ENGRAVED STERLING SILVER CAVALRY"S" SHANK BRIDLE WESTERN CURB COPPER ROLLER BIT BUY IT NOW! Or make a serious offer! Attention collectors and horse show exhibitors! For your consideration. A vintage GORGEOUS engraved sterling silver bit. This bit is absolutely stunning, and the genuine STERLING and stainless steel"Calvary style S" cheeks are in such amazing condition. They look almost brand new. The close up photos show the amazing quality of the engraving. The mouthpiece is a medium 1-1/2 inch high curb with a solid copper roller and measures 3/8" in diameter by 5" inches wide. The shanks measure 8-1/2 inches total in length and the measurement from the mouthpiece to the top rings is 3 inches. The total weight of this substantial bit is 1 pound 4 ounces. You will have to look hard to find a more beautiful ... moresterling silver bit on eBay! Thank you for viewing my auctions! I will leave feedback after receiving feedback from buyers as confirmation item has been received. All sales are final unless otherwise noted. Payment is due immediately following end of listing.
GERMAN SILVER BUSTER WELCH CUTTER ENGRAVED SHOW CURB WESTERN BRIDLE BIT Description. BUY IT NOW! Or make a serious offer! Attention collectors. Show exhibitors! This is a beautiful stainless steel show curb bit with German Silver(Nickel) GORGEOUS engraved overlay on the cheeks. The close up photos show the fabulous quality of the engraving on the 7-1/2 inch long"Buster Welch" style grazing shanks. The shanks are fixed solid and the"purchase" measures in at 3 inches. This is a very well made German Silver overlaid stainless steel bit with a 3/8" diameter x 5 inch low curb stainless ste el copper inl aid mouthpiece and weighs in at 14.18 ounces. This stunning bit will make a great addition to your show bit collection and will look great in any show ring setting. This bit has great balance and great feel. And will enhance ... moreany horse's profile in the show pen. Thank you for viewing my auctions! I will leave feedback after receiving feedback from buyers as confirmation item has been received. Payment All sales are final! Payment is due immediately following end of listing. Shipping International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I can not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior.
PLATED STEEL WESTERN 9" TIRE TOOL SHANK SHOW BIT WITH 5-1/8" LOW CURB MOUTHPIECE BUY IT NOW! This is a very nice used steel show bit with a low curb mouthpiece. The"tire tool" shanks measure 9 inches long for extra leverage and the mouthpiece is 5-1/8 inches wide by 1/2 inch in diameter. The bit weighs 14 ounces making it a good choice for that horse that needs a little more of a reminder to stay in the bridle. This bit is in very good shape except for a small spot on the back of the left rein loop where the heavy plating has flaked off as shown in the two close up photos. There are no makers marks on the bit and I haven't seen another similar bit on eBay. THANK YOU FOR VIEWING MY AUCTIONS! I will leave feedback after receiving feedback as confirmation that item has been received. Multiple items purchased may be eligible ... morefor combined shipping discounts. Check out my other items! International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I can not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. 25% Restocking Fee charged on all Returns. Packaged items returned must be in same unopened condition as shipped by seller. And all returned items must match the condition of all listing photos with no signs of use or wear. a1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3Ad%60%3Ea1%3E-13e46ff4968-0xfb-
VINTAGE FLEMING STERLING SILVER WESTERN"SEVEN" SHANK CURB BIT BUY IT NOW! Or make a serious offer! Attention collectors. Show exhibitors! For your consideration, a vintage STERLING SILVER show bit made by FLEMING. This vintage bit is absolutely stunning. And the engraving on the sterling silver"seven" shanks is gorgeous. This lightly used bit is in such amazing condition, it appears to be almost brand new. This bit has a very low iron curb mouthpiece and stainless steel shanks. The inside of the right cheek is stamped with the maker's mark"FLEMING" This is a great bit for starting a young horse in the bridle. It weighs a light 11.04 ounces. The gentle curb mouthpiece is stamped"Mexico" and has inlaid copper strips on the back side. The shanks measure 7-1/2 inches and the mouthpiece is 5 inches wide ... moreby 1/2 inch in diameter. This is truly a unique bit, and will be a magnificent addition to your collection! Thank you for viewing my auctions! I will leave feedback after receiving feedback from buyers as confirmation item has been received. All sales are final unless otherwise noted. Payment is due immediately following end of listing.
GREG DARNALLSWEET IRON LOOSE JAW"SEVEN" SHANK MEDIUM FLAT PORT CURB WESTERN BIT BUY IT NOW! Or make a serious offer! This is an older Greg Darnall sweet iron bit with a low US port curb mouthpiece and loose jaw"Seven" style cheeks. I have searched all over and I can't find another bit with this combination of the short spoon US port and seven shank. The second photo shows the GD makers mark on the top of the right shank. This bit is a great bit and does show some signs of rust as is typical with any sweet iron bit. The seven shank was designed for the broke or more advanced horse. The lift to the shank ratio quickens the leverage reaction time allowing the riders hand to be more subtle. The short. Spooned U.S. Mouth is a good bit for establishing a little more headset. The spooned port lays flat against the palate ... morefor more control and flexion with less pressure. The wider port base offers good tongue relief. The cold steel mouthpiece will rust creating a pleasant"sweet" taste. This medium port curb bit is for horses that require tongue relief and bar pressure. It is a very good curb bit that allows for more control than lower port mouthpieces. This is still a very high quality bit with great balance. And feel that will translate to your communication with your horse. Darnall bits are renowned for their quality and longevity. This bit has 8 inch long cheeks. A 5-1/8 inch wide by 1/2 inch diameter sweet steel mouthpiece. The purchase measures 2-1/8 inches in height. The bit weighs in at 13.97 ounces and demonstrates perfect balance. This bit will make a great addition to your working bit collection. Thank you for viewing my auctions! I will leave feedback after receiving feedback from buyers as confirmation item has been received. All sales are final! Payment is due immediately following end of listing. International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please
VINTAGE GREG DARNALL SWEET IRON LOOSE JAW CURB BIT WITH STERLING SILVER CONCHO BUY IT NOW! This is a very nice pre-owned vintage sweet iron show bit made by GREG DARNALL with a sterling silver concho mounted on each side. I've tried to research this bit. And can't find anything like it available for sale anywhere else. This bit is very balanced and weighs 1 pound 1 ounce. The measure 7 inches long and the mouthpiece is 5 inches wide by 3/8 inch in diameter. This bit features a swept back grazing style aluminum cheek with a 1-3/4 inch diameter Sterling Silver engraved concho. The maker's mark GD is located above the left hand side rein ring. The bit is in good condition. Although there is some surface rusting which is typical of a vintage iron bit. The sweet iron mouthpiece has a light coat of rust as is typical from use. This ... morestunning perfectly balanced bit will make a great addition to your show bit collection and will look great in any show ring setting. Don't miss out on the chance to add this great VINTAGE Greg Darnall maker marked Sterling Silver bit to your training and show collection. THANK YOU FOR VIEWING MY AUCTIONS! I will leave feedback after receiving feedback as confirmation that item has been received. Multiple items purchased may be eligible for combined shipping discounts. Check out my other items! International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I can not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. 25% Restocking Fee charged on all Returns. Packaged items returned must be in same
ANTIQUE/ VINTAGE MADE IN ENGLAND NEVER RUST WEYMOUTH HIGH CURB ENGLISH BIT Description BUY IT NOW! Or make a serious offer! Attention collectors. Show exhibitors! This is a vintage Weymouth bit Made in England by Never Rust. New bits from Never Rust retail for $120.00 and up nowadays. This bit is unusual in that the curb is higher than is typical of most Weymouth bits at 1-3/8" high. The close up photos show the makers mark on the back side of the mouthpiece. This is a very well made bit with a 3/8" diameter x 5 inch mouthpiece with a 7-1/2 inch shank and weighs in at 14 ounces. This is a handmade bit and has a wonderful patina that can only come from age. This stunning bit is in very fine condition for it's age and will make a great addition to your show bit collection or will look great in any show ring setting. Thank you ... morefor viewing my auctions! I will leave feedback after receiving feedback from buyers as confirmation item has been received. Payment Payment is due immediately following end of listing. Shipping: International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I can not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. 25% Restocking Fee charged on all Returns. Packaged items returned must be in same unopened condition as shipped by seller. And all returned items must match the condition of all listing photos with no signs of use or wear.
TOP QUALITY C BIT BY BIT MASTER- SWEET IRON MOTHPIECE WITH 5.5" SHANK- IN 4 3/4" MOUTHPIECE STYLE# 67661- THIS IS A VERY GOOD LOW LEVERAGE BIT FOR COLTS THAT STILL NEED A LITTLE TUGGING OR FOR OLDER HORSES THAT HAVE A GOOD MOUTH. MEDIUM SEVERE MOUTH IN A MODERATELY LIGHT BIT. 1 1/2" SWEET IRON MEDIUM PORT* OUR PRICE INCLUDES FREE SHIPPING VIA US POST OFFICE. WE WILL ALSO MAIL THIS INTL.PLEASE CONTACT SELLER FOR SHIPPING RATES.
You are bidding on a hand forged bit created by a very early blacksmith. This style of bit was obsolete sometime well before the onset of the Civil War. I doubt you will see one of these again anytime soon! This really neat design bit is in a very solid condition. We got this item from an estate sale from a old woman who had collected beautiful items from western history. Most of these old bits were made for a specific farmer or cowboy and for his specific horse. The square nail design on the ends of the port weren't made for quite a while before the Civil War began. You can see in the pictures that the work done on this bit wasn't done evenly. The port isn't cen tered. The top 2 ears of the bit are slightly off. I think it only adds to the charm. The rings were formed by splitting the steel and then forging the shape into round ... morerings on each end. Think of how much time it took to make this! Whether you keep this in a treasured collection or you incorporate it into your home decor this item will surely be a source of conversation. You're investing in a piece of history. This very rare piece will only go up in value over time. Total Length: 8 7/8 Inches(one side) 9 Inches(other side) Mouth Width: 5 Inches Bottom of Bit: 4 7/8 Inches(slightly bent inwards) Cheek Length: 6 3/8 Inches Port Height: 3/4 Inch Please examine the pictures carefully(as I try to convey the condition in the pictures as best I can) and feel free ask me questions about anything relating to this item. I want you to make an informed decision and to be happy with your purchase. I will ship the item within 1 day of verification of receipt of payment and provide a tracking number. Please pay within 3 days of the final day of the auction or let me know if you plan to possibly combine items for reduced shipping costs. I will pay for insurance on any item that sells for more than $100 at no additional cost to you. Kindly give me a positive response when you have this unique item in your hand and you've been happy with your auction
FEEL FREE TO ~MAKE AN OFFER~ Shipping in the USA only $8.95 and we are GLAD to ship OUT of the USA ITEM#CCC-045-t86 We are listing today some old HORSE BITS. STIRRUPS& GUN LEATHER that we have had in storage for well over 25 years. This is one that was packed up in a box that we had from our Western Store open for some 18 years. This is a bit that is made of NICKEL SILVER. It is nice and short and looks almost like bronze but I am sure it is Nickel Silver. It has a ribbed mouth. It does not have any port. Very nice condition This bit is 5 3/8" tall The mouth is 5" No Port Shanks are only 3" long Look at more of our bits and save on shipping by paying for them at one time. Shipping in the USA will be $8.99 via Priority mail with a tracking number. Be sure and visit our eBay store with many Antique WESTERN BITS. SPURS ETC. ... moreGOD BLESS A M E R I C A& SUPPORT OUR TROOPS! Thanks for looking! Pay me securely with any major credit card through PayPal!
Antique Civil War French Artillery Confederate Horse Curb Bit Full Cheek Pelham You are bidding on a lot of antique horse bits! You will receive all that is shown in the photos: French Artillery Civil War Era Curb bit. With brass crossed cannons/ flaming bomb logo boss. The Mouthpiece is very close to 5 inches wide. The entire shank is 6.75 inches long. There are some numbers on the exterior of the cheeks, I see a 22 and some 8s, but I can't make out the complete number if there is more to it. There is also an E on the cheek. Full cheek snaffle. Very old and hand forged, jointed mouth is about 6.5 inches wide. The entire cheek shank is about 6 inches long. Hand forged Pelham bit with chain. D-rings, and mouthpiece has port. Mouthpiece is about 5 inches wide, Entire Cheek is 5.5 inches long. Larger Pelham with attached hooks. May be hand ... moreforged. This one is a little shinier than the others. The mouthpiece is curved. With no port. Mouthpiece is about 7 inches wide, Entire cheek is 5.5 inches long. All have a nice patina See photos* Please read our terms and conditions below before placing a bid. If you have any questions feel free to contact us! We accept payment through Paypal. Payments made by Paypal must have a confirmed shipping address. If you have any questions regarding payment. Please contact us before placing a bid. Buyer is responsible for all taxes and fees required by the state of California. California state tax of 7.775% applies to all residents of California and for items picked up at AuctionPros. Unpaid auctions will be forfeited after seven(7) days and a non-paying bidder report will be filed with eBay to recover the closing fees of the auction. We only ship to Paypal confirmed shipping address. We will NOT honor requests to ship items to an alternate address if making payment through Paypal. Our items will ship securely via FedEX Ground. Please use the eBay shipping calculator to determine domestic shipping costs. Alaska. Hawaii, Puerto Rico, Canada. And all other countries. Please con
folks i do not know a lot about bits and spurs so please look close at many pictures to be confident you are getting what you expect. actual item pictured. I purchased this at an auction selling a collection of vol c woods(has passed away) who ran a saddlery in westville oklahoma. actual item pictured. this is the way i got the bit. used as you see. thank you
Feel FREE to ~MAKE AN OFFER~ BEAUTIFUL ~ CROCKETT ~ SPELLED OUT ON MOUTH Long Shank Iron HORSE BIT This Bit is a really one of the favorites of riders. Could help you to get your horse to stop on a dime. This is a sturdy bit and is in good condition but could stand to be cleaned! It has a 5" mouth Is a total of 8.25" long The Port is 1" across This is a horse size Bit THESE OLD BIT are getting VERY HARD to find! They were proudly MADE IN THE U S A! ITEM WS-180-082911 See the other bits that we have listed today on eBay Pay me securely with any major credit card through PayPal Be sure and see the other items listed today and SAVE on SHIPPING by paying for all in one Transaction and we are Glad to SHIP OUT OF THE U S A! Shipping IN THE USA only $9.95 via PRIORITY MAIL with a tracking number
Hand made bit by California maker Darrell Young. 6 3/4" cheek. 5" wide port mounth with copper stripes inlaid in back of port. Six silver pieces on each cheek. Natural patina. Marked" DY" and" 33" on the mouth. Not bent. Broken or repaired. Lays flat. Shows only light use. Neat little light weight bit weighing only 9 ounces. NO RESERVE! $6 priority shipping. THANKS for looking.see my other auctions for more cowboy gear. Look at the pictures and ask any questions before bidding. I am not an expert in every area. You may know more about an item than I do. A lot of the items I sell are used. I try to use the best photos and descriptions that I can. My items generally sell"as is" unless I make a major mistake in the description. I will combine shipping on multiple items. SHIPPING IS TO U.S. ONLY unless ... moreprior arrangements are made. I will ship. I will ship to Canada but shipping cost may be higher.
Garcia Bit. Silver Overlay, Low Curb W/Copper Roller, Cutter-Type#9319 Garcia Bit#9319 Silver Overlay Cutter-Type Hand Engraved. Used/Vintage Low Curb W/Cricket(Roller) Copper Inlay on Mouthpiece This is a used or vintage silver overlay Garcia bit that is a cutter-type bit being is hand engraved. It has low curb. Or low port, with a copper cricket(roller) and copper inlays on the 5 inch iron mouthpiece. Each shank is about 8 and 5/8 inches long. Marled on the inside of one shank(pictured) GARCIA 9319 ELKO. NV. Bit is in very good condition with patina on silver. New owner may polish is desired. Iron mouthpiece has minor rust as expected. New price for a similar bit is $450.00. Plus an extra $50 for port, copper roller, and copper inlays. This bit has a different model number. But is similar. Buyer pays for Priority Mail shipping for 3 pounds ... moreshipping weight(bit. Box& packing materials) I will pay for the insurance for the high bid amount. Please note- no additional shipping fee is charged. The eBay calculator determines shipping charges. US bidders only please. Please understand that I do not take returns. Do not bid if you are not prepared to pay. Certain images/photos incorporated into this template are the royalty free property of JupiterImages.
GLAD to SHIP OUT of the USA FEEL FREE TO"MAKE AN OFFER" This is a VERY OLD and has a VERY HIGH PORT We are listing some bits today some of which we have had well over 20+ years and some that we recently traded for. Many are one of a kind and some are extremely old. NONE of our bits will you find in todays Modern Western Store as they are all older bits and most of the older bits were very well made and some of the bits we are listing are just really unusual and great for collecting and are one of a kind. This bit is an old MEXICAN bit and has a very high port. One thing that is unusual on it as it has a very fancy double chain curb that is all orig. to the bit. It does have short rein chains as well. Great old Workmanship on this old bit. This bit is 7" tall The Mouth is 4 1/8" Pretty Standard for a Mexican Bit) The port ... moreis 1 7/8" tall Item DM-020-BB23 Look at more of our bits and save on shipping by paying for them at one time. Shipping in the USA will be $8.99 via Priority mail with a tracking number. Be sure and visit our eBay store with many Antique WESTERN SADDLES. SPURS ETC. Thanks for looking! Pay me securely with any major credit card through PayPal!
ITEM# WS-335 Tb113011 We are listing today some old HORSE BITS that we have had in storage for well over 20 years. A few of our antique bits were purchased from Gerard Malm who wrote the wonderful Book on Bits. None that we are listing today were from him. This is a VERY UNUSUAL BIT and appears to be made of solid Bronze or maybe even Copper. I did not clean it to find out for sure and it is well made. It might have a makers mark on it but you might find one. It has a very nice curb chain with a hook on it. THESE ARE GETTING HARD TO FIND~!~ It is in AS FOUND CONDITION. I have not removed any of the dirt The mouth is 4 3/4" wide The total length of the bit is 7 3/8" For around 30 years we have been collecting antique bits and spurs and through the years and these good old bits and spurs are getting very hard to find. These are no ... morelonger made as these were made in the great U S A Look at more of our bits and save on shipping by paying for them at one time. Shipping in the USA will be $7.99 via Priority mail with a tracking number. Be sure and visit our eBay store with many Antique WESTERN SADDLES. SPURS ETC. Thanks for looking! Pay me securely with any major credit card through PayPal! f04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-13e5c5687a6-0xfd-
For Sale Is One(1) Vintage. Steel Curb Bit Sporting Silver Engraved Conchos, With Gold DS Letters Centered in Conchos. Beautiful Craftsmanship! What a great collectors find. Any Item Shipped Outside of The United States Will Not Be Shipped Until The Adjusted Shipping Charge Is Paid! Domestic Shipping Policy: All items are shipped USPS First Class Mail. Expedited shipping is available if requested by the customer at time of purchase. I do not include tracking or insurance unless the customer’s request these items by contacting me. International Shipping Policy: I will ship anywhere in the World! My method of shipping will be International First Class Mail unless you contact me and request expedited shipping. I usually. Within 12 hours, e-mail a quote for the service you request. If you wish to have insurance and tracking on your item or items, ... morethis is the time to let me know, otherwise it will not be insured and will not be traceable. I had 300 listings in existence before going International. Those items will not have a shipping weight listed. Contact me and I will weigh the item and e-Mail you with the weight. At which time you can determine your shipping and handling charge for your shipping destination. I charge $5.00 for handling charges on every item, unless you request the items be lumped together. I will not be responsible for any duties. Taxes, tariffs, and/or custom fees which your country may impose. Items will be shipped using the end of Auction. Or Buy it Now Values, as shown on the e-Bay documents. I will not report items as gifts, or report a lower value on the Customs Declaration forms filled out upon shipping. USPS International First Class Mail is in addition to my minimum handling charge $5.00 per package. I will not ship an item until the item has been paid for. Items shipped by International First Class Mail are not traceable or insurable. Please consider USPS Priority mail. Which is traceable, and insurable.
For Sale Is One(1) Antique. Old Spanish Sweet Water Curb Bit With Copper On The Curb, And Silver Hash Marks On The Sides. No Markings On The Bit For Manufacturer. Beautiful Craftsmanship! What a great collectors find. Any Item Shipped Outside of The United States Will Not Be Shipped Until The Adjusted Shipping Charge Is Paid! Domestic Shipping Policy: All items are shipped USPS First Class Mail. Expedited shipping is available if requested by the customer at time of purchase. I do not include tracking or insurance unless the customer’s request these items by contacting me. International Shipping Policy: I will ship anywhere in the World! My method of shipping will be International First Class Mail unless you contact me and request expedited shipping. I usually. Within 12 hours, e-mail a quote for the service you request. If you wish to have ... moreinsurance and tracking on your item or items, this is the time to let me know, otherwise it will not be insured and will not be traceable. I had 300 listings in existence before going International. Those items will not have a shipping weight listed. Contact me and I will weigh the item and e-Mail you with the weight. At which time you can determine your shipping and handling charge for your shipping destination. I charge $5.00 for handling charges on every item, unless you request the items be lumped together. I will not be responsible for any duties. Taxes, tariffs, and/or custom fees which your country may impose. Items will be shipped using the end of Auction. Or Buy it Now Values, as shown on the e-Bay documents. I will not report items as gifts, or report a lower value on the Customs Declaration forms filled out upon shipping. USPS International First Class Mail is in addition to my minimum handling charge $5.00 per package. I will not ship an item until the item has been paid for. Items shipped by International First Class Mail are not traceable or insurable. Please consider USPS Priority mail. Which is traceable, and insurable.
FEEL FREE to ~ MAKE AN OFFER ~ on any of our items! SHIPPING out of the USA VIA PRIORITY MAIL only $18.00 ITEM#Western-1015b10 We are listing today some old HORSE BITS that we have had in storage for many years. This is a old Unmarked Bit There is some rust and I did not clean it to try and find a mark. This has three pieces of copper mountings on each side. It does have some rust as it is an old bit. The mouth is 5" wide with a low port and the total length of the bit is 7.5" I am sure this was made in the great U S A many years ago Look at more of our bits and save on shipping by paying for them at one time. Shipping in the USA will be $8.99 via Priority mail with a tracking number or $16.00 shipped out of the USA Be sure and visit our eBay store with many Antique WESTERN SADDLES. SPURS ETC. Thanks for looking! Pay me securely ... morewith any major credit card through PayPal!
FEEL FREE TO ~!MAKE AN OFFER!~ on ANY ITEMS LISTED ITEM#BIT-191-Bx09 We are listing today some old HORSE BITS that we have had in storage for well over 20 years. This is a VERY OLD BIT and a real OLD WEST RELIC. There is a missing ring but other than that it is complete, it has a real elegant design and in its day I am sure it was very special. I am not sure who would have made this bit, I best guess would be Buermann. This is 4.25" tall not counting the ring and the mouth is 4 5/8 so it was made for a small horse or pony. Look at more of our bits and save on shipping by paying for them at one time. Shipping in the USA will be $7.99 via Priority mail with a tracking number. Be sure and visit our eBay store with many Antique WESTERN SADDLES. SPURS ETC. Thanks for looking! Pay me securely with any major credit card through PayPal!
THIS SALE IS FOR A NICE VINTAGE HAND MADE- MOUNTED SHOW BIT HAND MADE BY CALIFORNIA MAKER GORDON HAYES- MARKED G H THE BIT IS VINTAGE USED IN GOOD CONDITION PLEASE TAKE A LOOK AT THE PICTURES TO GET A BETTER IDEA OF CONDITION DIMENSIONS. CHEEKS MEASURE 7" INCHES- MOUTH 5" INCHES WITH COOPER INLAID REVIEW ALL PHOTOS CAREFULLY AND BE SURE ITEM IS WHAT YOU WANT BEFORE PURCHASING USE THE ZOOM TOOL ON THE- 12- PHOTOS TO INSPECT THE ITEM E-MAIL ME ANY QUESTIONS LOOK AT THE PHOTOGRAPH AND YOU SEE EXACTLY WHAT YOU WILL RECEIVE THIS BIT IS SOLD AS-IS THANKS FOR LOOKING f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13e5dd537f7-0x107-
rare Keyston aluminum bit. Very low port/ curb mouthpiece. Nice clear maker mark(I can't get a good picture of it though because I have a cheapo camera) nice leather curb strap included which might be the original as it is copper riveted on purchase above mouth 2 shank below mouth 2 13/16 difference between top of mouth& top of curb 0.5" weight w/ strap 4.8 oz
Rare& collectible short shank maker-marked Crockett bit with mild port. Crockett" stamped in full on shank. aluminum with brass rivit concho. Gentle used condition with no flaws or defects. Shanks are 5.5" long& all loops. 1.5" each, 5" mouth. Thanks for Looking and Happy Bidding! Posted with
Description Beautiful Les Vogt marked Santa Barbara cheek 5" curb loose cheek curb bit. Sweet iron mouthpiece, low port with roller. Really unique cheek style with overlaid filigree pattern, berry and silver star. Good used condition, needs some detailing, otherwise ready to go to work. This is a stunning using bit which can go right to the arena or grace your tack collection-it will definately turn heads. No Reserve! Please note: If you have a slow internet connection or ebay is experiencing high volumes. You may need to allow a little extra time for the ample photos to load. Payment due in 7 days from auction end- unless you are planning on bidding on other items and wish to combine shipping-in that case please wait for my final invoice. Thanks for looking and check out my other pieces of vintage show equipment including headstalls. ... moreReins and other using gear.
Vintage chromed curb bit in very good used condition. There is some wear to the chrome and copper. No other damage. I'm not sure what material the conchos are made of. It has a 5" mouth and 6 3/4" cheeks not including the rein rings. Unmarked. Please see all the pictures, they are a large part of the description. Please ask any questions prior to bidding. I will combine shipping if I can do so safely. Fragile items will mostly be shipped Priority. As the post office seems to think parcel post boxes are footballs! Local pickups are always welcome, as are international bidders. The vast majority of the items I sell are vintage and/or pre owned. I do not know what they have been exposed to or where they have been. They may have been around pets. Perfumes, chemicals, or smoke. I also often use recycled packing materials. If you ... moreare highly sensitive to any of these things, I'd rather you not bid and end up unhappy. Thank you for viewing my auction and have a great day! Check out my! Be sure to add me to your!
This is a lightly used handmade silver mounted solid shank curb bit made long time bit and spur maker Wade Brannon of Silverton. Texas. It is marked Brannon 128 inside one cheek piece. The headstall and curb chain are new. The bit is steel and is beginning to rust. It is mounted with an engraved nickel silver arrow. The slide ear headstall is oiled heavy harness leather and has a brass cart buckle attached with a brad. The headstall is not maker marked. The bit attaches with latigo lace leather. It has a nylon and chain curb strap. This would be a nice headstall and bit to use. Just add your reins and it will be ready to ride. Measurements: Mouth Piece(measured between cheeks) 4 7/8” Cheek Pieces(measured from the top of headstall ring to end of rein ring) 7 ¼” Port Height(measured from top of port to bottom of mouth piece) 1 ¾” ... moreMouth Diameter– a little over 3/8” Headstall Width– 5/8” Headstall Length– 38 ¾” to 42 ¾” Powered by The free listing tool. List your items fast and easy and manage your active items.
Vintage Maker Marked Crockett Bit. Full spelling of"Crockett" Nice mark. Big ring and bit end concho. Nice filigree work with minor scuffs. Good old collecitble bit. Standard crockett 5" mouth. Shank length, 6.5" The filigree work is very nice. Unique leaf and scroll. See my other Crockett auction!
Very nice Antique North Judd curb bit.Its gold in color and not sure if it was made that way or if painted to keep from rusting either way the bit is in great usable condition with some scuffs and very little rusting which is mainly on rings! Bit curb measures 4 3/4" wide and Shanks are 5 3/4" long.The top rings got a slight flare giving you 5" of space on top. Bit is double stamped with the anchor! Please see pics for items condition! Please ask all question before item ends! Payment due within 3 days of auctions end!
WONDERFUL OLD WEYMOUTH BIT MADE BY NORTH& JUDD 4 1/2" MOUTH WITH 5 1/2" SHANK VERY GOOD CONDITION FOR AN OLD BIT. I.
This is a used handmade heavy harness slide ear headstall with a used stainless short shank flattened round port curb bit. And a new curb chain. Add your reins and it will be ready to ride. The headstall is handmade but is not maker marked. It is made out of heavy harness leather. It has a single buckle adjustment with a brass cart buckle attached to the headstall with brads. The bit ends are straight and the bit attaches with latigo lace leather. The bit is not maker marked. It is stainless and has a flattened rounded port. It is not bent. Broken, or repaired. The headstall and bit show signs of normal use with no issues. It has a new nylon and chain curb strap. Measurements Headstall Cheek Piece Width– ¾” Headstall Cheek Piece Length– 35 ¼” to 43 ¾” Bit Cheek Pieces(measured from the end to end of each ring) 5 ¼” Bit ... moreMouth Piece(measured between the cheek pieces) 5” Bit Mouth Piece Diameter– a little less than 3/8”
This is a 1909 US marked#3 curb horse bit with slobber chain. NO breaks. Cracks or repairs to the bit. T his type of bit was made in 4 mouth piece sizes. Shank is approx. 7 inches. Mouth piece is approx. 4 3/4 inches. Email any questions before bidding. FREE shipping. No refund or returns. check out my other listings.thanks for looking
This bit is rare on several counts.it is a prototype bit made by Daryl Davis which the Flat KD Shank medium port he makes today is based on. This bit was custom made for me over 20 years ago by Daryl. It also features STERLING SILVER ALONG THE CHEEKS.I haven't polished it and you can see the amount of oxidation. I haven't used this bit in years.I bought it specifically for a wonderful Little Peppy mare I showed back in the early 90's and it hasn't been used since! There is nothing wrong with it. It is rusted just like it is supposed to be. I love this bit, but never use it, so it's going to a new home! Posted with On May-09-13 at 09:17:21 PDT. Seller added the following information: Extended shipping time due to the fact I'm a farmer and this is my EXTREMELY BUSY time. I am shipping once a week. But if it rains: I'll ... moreship more often! THANKS!
ITEM# COW-511-020911 FEEL FREE TO MAKE AN OFFER We are listing today some more of our old HORSE BITS that we have had in storage for well over 25 years. Be sure and see the spurs that we have listed as well. This is a real nice older RENALDE& STAINLESS STEEL marked Bit. This bit is in very good condition and I do not think I have seen one like this before. The mounting are very nice and the bit is in very good condition. This is 7.5" tall and mouth is 5 1/16" These are no longer made as these were made in the great U S A Look at more of our bits and save on shipping by paying for them at one time. GOD BLESS A M E R I C A& SUPPORT OUR TROOPS! Shipping in the USA will be $7.99 via Priority mail with a tracking number. Be sure and visit our eBay store with many Antique WESTERN SADDLES. SPURS ETC. Thanks for looking! Pay me ... moresecurely with any major credit card through PayPal!
this would really shine if put to a buffer. Great shape for an aluminum bit this 5" low curb Renalde is a great start to a collection of bridle bits. 5" mouth 2.5" purchase 3.5" shank weight 5.8 oz still can be used too. Nice large rein rings& headstall rings. well balanced. low severity. top of curb is 13/16 from top of mouth. maker mark is clear on inside of left shank low shipping.Check out my!
Old fancy snaffle bit. Silver cheek plates with black mouth piece. Can send more pictures.
THIS SALE IS FOR A VINTAGE USED- REPRODUCTION- CIVIL WAR REENACTORS- BRIDLE- BIT- ROSETTES THE BRIDLE AND BIT ARE OLD USED IN GOOD SHAPE THE LEATHER IS OLD WORN AND SUPPLE PLEASE TAKE A LOOK AT THE PICTURES TO GET BETTER IDEA OF CONDITION REVIEW ALL PHOTOS CAREFULLY AND BE SURE ITEM IS WHAT YOU WANT BEFORE PURCHASING USE THE ZOOM TOOL ON THE = 12- PHOTOS TO INSPECT THE ITEM THESE BRIDLE AND BIT IS SOLD AS-IS USED WORN AND NICE LOOK AT THE PHOTOGRAPHS AND YOU SEE EXACTLY WHAT YOU WILL RECEIVE PLEASE E-MAIL ME ANY QUESTIONS THANKS FOR LOOKING
This is an older bit and because it is so rusty I have not had any luck finding any identifying markings on it- if it even ever had any. The bit has a type of black finish applied to it which looks rather shiny greyish/blue in the direct sun. The outsides of the shanks have some silver pieces on them. Whether they are actually real silver or not I do not know. One of the conchos has a rather large dent it, which I believe you can see in the second picture. One of the rein loops has some corrosion(along with a lot of rust) on it, as shown in the 11th picture. One of the lower shanks is ever so slightly out of alignment with the other one and if you look at the last picture(picture#12) you can see this- one of the lower shanks is touching the surface and the other one is not) The unique mouth-piece measures 5" The length of the bit is ... morealmost 7 3/8" long. This old bit is being sold"no returns" and I'll be happy to answer any questions. Bidders from the U.S. only please and payment would be appreciated with-in 4 days after the auction ends. Thank-you. 6gf1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*2%60%3E6gf1-13eb0e46a84-0x100-
This is a really unusual looking designed old Antique Horse Bit-it has both Sterling Silver and Copper on it-old time engraving design-lots of decoration on the lip bar-old sweet iron curb mouth-the widest point on the cheek is 2-3/8 in. wide-it is 7-3/4 in. long-5-1/4 in. wide mouth piece-2 in. wide side conchos-this very old bit would look great in an old horsehair bridle or cowboy headstall-thanks for looking.
Chrome curb bit in very good pre owned condition with no damage. It has a 5" mouth and with the bridle rings straight up the cheeks are 7" long. Marked Sims on the mouth and the port is 1 3/4" high. Please see all the pictures. They are a large part of the description. Please ask any questions prior to bidding. I will combine shipping if I can do so safely. Fragile items will mostly be shipped Priority. As the post office seems to think parcel post boxes are footballs! Local pickups are always welcome, as are international bidders. The vast majority of the items I sell are vintage and/or pre owned. I do not know what they have been exposed to or where they have been. They may have been around pets. Perfumes, chemicals, or smoke. I also often use recycled packing materials. If you are highly sensitive to any of these things, ... moreI'd rather you not bid and end up unhappy. Thank you for viewing my auction and have a great day! Check out my! Be sure to add me to your! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*72%3F7e%3D%3E-13eb3b4c280-0xfa-
ITEM#WS-329bx16 We are listing today some old HORSE BITS that we have had in storage for well over 25 years. This is a great old bit It is very shown in the August Buermann Catalog as shown in the background. This is an awesome old bit and you can easily see the star on it. The total length is 6.5" The mouth is 4 3/4" It could use a GOOD SCRUBBING as it has not been cleaned or used for MANY years. This is a U S A made Bit! Made perhaps 100 years ago! These old bits make great things to collect as they should just gain in value and do not take up as much space as a saddle! Look at more of our bits and save on shipping by paying for them at one time. GOD BLESS A M E R I C A& SUPPORT OUR TROOPS! Shipping in the USA will be $7.99 via Priority mail with a tracking number. Be sure and visit our eBay store with many Antique WESTERN ... moreSADDLES. SPURS ETC. Thanks for looking! Pay me securely with any major credit card through PayPal! 7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw5%7Fos1%3E%3E7-13eb474f344-0xf7-
ITEM#MD-113bb25 FEEL FREE TO ~MAKE AN OFFER~ We are listing today some old HORSE BITS that we have had in storage for well over 25 years. This is a GREAT OLD BIT! It is Stainless we think.has loose cheeks and curb chain and is missing one hook. We just tied it with a string on one side. No reason you could not use this bit. We are not sure of the age but the condition is awesome. SIZE The total length is 3 3/4" The Mouth is 5 1/8" The Shanks are as shown in the photo The Port is 5/8" This is a real good looking bit ready to use or collect. These old bits make great things to collect as they should just gain in value and do not take up as much space as a saddle! These are no longer made as these were made in the great U S A Look at more of our bits and save on shipping by paying for them at one time. GOD BLESS A M E R I C A& ... moreSUPPORT OUR TROOPS! Shipping in the USA will be $8.95 via Priority mail with a tracking number. $18.00 to ship out of the USA Be sure and visit our eBay store with many Antique WESTERN SADDLES. SPURS ETC. Thanks for looking! Pay me securely with any major credit card through PayPal!
Feel FREE to ~MAKE AN OFFER~ VERY REASONABLE SHIPPING to CUSTOMERS out of the U S A(only $18 Prioirty mail) This bit and the others listed today had been packed up over 20 years and I just unpacked them yesterday. ANTIQUE ORNAMENTAL CURB HORSE BIT With FANCY CHEEKS This is a very nice bit that was in our collection of old horse bits that we have been collecting about 30 years. Mouth is 4 5/8" across It is 6" tall The Port is 5/8" tall It has not been MESSED with in any way Be sure and see the other one that we have listed. They are much alike but sides are a bit different. ITEM MD-47-bb26 See the other bits that we have listed today on eBay. These old bits are getting very hard to find and are great to invest in or use! They should just gain in value as time goes on. Pay me securely with any major credit card through PayPal ... moreBe sure and see the other items listed today and SAVE on SHIPPING by paying for all in one Transaction and we are Glad to SHIP OUT OF THE U S A! Shipping IN THE USA only $8.95 via PRIORITY MAIL with a tracking number
ITEM# II-023 FEEL FREE TO ~MAKE AN OFFER~ We are listing today some great old CROCKETT. RENALDE, COLORADO BIT& SPUR and RICARDO Bits that we have had a long time. This one is Fancy Bit with nice designs on the Shanks This is marked COLO BIT& SPUR THIS is a great looking bit and could still be used today This is in GREAT CONDITION but could use some polish The total length is 7 3/8" The Shanks are 4 3/4" The mouth is 5" across The port is low at 1/2" This bit is READY TO GO but could use some cleaning This is a real good looking bit and as in found condition and is in great condtiion. These old bits make great things to collect or use as they should just gain in value and do not take up as much space as a saddle! These are no longer made as these were made in the great U S A Look at more of our bits and save on ... moreshipping by paying for them at one time. GOD BLESS A M E R I C A& SUPPORT OUR TROOPS! Shipping in the USA will be $8.99 via Priority mail with a tracking number. We will gladly ship OUT of the USA Be sure and visit our eBay store with many Antique WESTERN SADDLES. SPURS ETC. Thanks for looking! Pay me securely with any major credit card through PayPal!
This is a rare and very collectible Kangaroo bit. Which shows a little kangaroo, plus the written word, on the shanks. It is also marked Made in England. Similar bits can be found elsewhere on Ebay priced above $150.00 and $170.00. Here's one for your collection at a bargain price!
This is a lovely old marked" Crocket" silver color aluminum bit. I have kept it for years because I have never seen one like it. I have seen old yucky ones, but never one this shiny and pretty. I have always wanted to research it somehow. But never got around to it. It is sturdy and strong enough to use and would be terrific in a bit collection. It is full horse size with a 5 inch mouth and 7 inch shanks. It is a good classic. Lightweight western horse bit. Please check out my other auctions for some very nice items. I am putting together a big moving sale and there is going to be a lot of nice things to bid on; including 3 amazing silver show bits and a brand new set of hot pink. Fuscia chaps! Your questions are always welcome and I will take the time to answer them all. I do expect your payment to arrive within 7 days and I will ... morebe happy to combine shipping costs to save you money. I cannot accept returns and all items are used unless otherwise stated and sold in"As Is" condition. I can ship packages anywhere in the world. Let me know if you need an international quote. Buyers outside the U.S.A. please use Paypal for payments! I like to let the bidders decide a fair price on my items, so I don't do"Buy it Now" auctions. Thanks for taking the time to look at my auctions, I appreciate your time and look forward to hearing from you soon! Be sure to add me to your! Check out my! Attention all bidders: there are several Ebay scammers out right now that are sending false second chance offers to bidders. I don't send second chance offers. If you receive one please report it immidiately to spoof@ebay.com I WILL NEVER SEND SECOND CHANCE OFFERS- IF YOU RECIEVE ONE IT IS NOT FROM ME. PLEASE DO NOT SEND PAYMENT. REPORT IMMIDIATELY TO EBAY!
good example of 1909 bit has US and 3 and inspector initials stampings are clear I WOULD APPRECIATE YOUR POSITIVE FEEDBACK AND 5 STAR RATING ACROSS THE BOARD. EBAY HAS BECOME EXTREMELY HOSTILE TOWARDS SELLERS WHEN BUYERS GIVE US LOW STAR RATINGS EVEN WHEN THE SALE IS POSITIVE. MY FEEDBACK IS 100% POSITIVE AND HAS BEEN FOR YEARS. DESPITE THAT I RECEIVE THREATENING EMAILS FROM EBAY DUE TO THE FACT THAT A FEW IMBECILES GAVE ME 1 0R 2 STARS FOR POSTAGE AND HANDLING EVEN AFTER THEY HAVE SEEN THE QUITE REASONABLE AMOUNTS I CHARGE. POSTAGE IS NOT A MONEY MAKER ONLY A PASS ALONG CHARGE! THANKS BOB
These are great old bits. I just used one on a horse not wanting to slow down and the next time out was much better. They love the roller and keep their mind on the bit and the copper plate and roller create a wet mouth so less friction. The cheek pieces are loose style so more freedom and can be used a little like a snaffle to work off the side of mouth slightly but still a commanding bit that can be used w a light hand. Curb is 5 inches wide for average Horse. The"S" hooks at bottom are good if you ride in reins with slobber chains or easy on snap end reins. This has kind of a nickel finish and is in good straight condition. These are great riding bits still today. Quality made w all smooth pieces. Your horse will respect this bit and stop for you but do him the favor of ride and tie w a halter don't tie a horse to a hitchin ... morepost by his teeth in this thing. Good Luck! If the product's description or picture isn't detailed enough for you. Feel free to contact me for more information" WHAT MAKES MY AUCTIONS BETTER? NOTHING FISHY. Every effort has been made to describe the item fully. If there is a flaw on the item. It is revealed in the ad. I want you to have the confidence that you are buying from a person with integrity throughout the whole transaction. HONEST SHIPPING. The domestic and international shipping charge is quoted in the shipping calculator. be sure to check the cost. Especially if international, so you know the total price when you bid. Most items are into the mail within 2 days after receiving payment so you're sure to get it quick. Pick ups are always welcome during store hours. We are in the city of Norco. Ca 92860. Our space is limited, so we prefer items picked up within 3 days of auction close. Contact us prior to bid if longer time is needed. YOU'RE KEPT HAPPY. I will do my best to keep things simple and pleasant for you! All questions. Suggestions, or concerns are welcome and responded to quickly. MY FEW AND EASY RULES. Payment is expected within 3 days of
This is a very classy looking. Vintage, sterling silver loose jaw curb bit. The engraving is beautiful and detailed. It has about a 5" mouth and it is 7 3/4" in total length. It is in excellent condition though it does have some tarnish and could use a good cleaning. This is a great bit to use or add to a collection. If you are the winning bidder we ask that you please pay for your item within 3 days of the close of the auction. If you would like to bid on an item but have less that 5 feedback please contact us ahead of time for bidding approval. We usually ship with 3 day of purchase and are happy to combine shipping when possible. Shipping and handling charges include insurance. International Buyers? Please Note: Import duties. Taxes and charges are not included in the item price or shipping costs. These charges are the buyers ... moreresponsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We won't under-value merchandise or mark the item as a gift on the customs forms. Doing that is against U.S. and international laws. Please feel free to ask any questions. We do everything we can to make sure all items are described honestly and accurately. If you have a problem with an item please contact us through e-bay before leaving feedback. We will leave good feedback for anybody that does the same for us. We do all we can to make sure every shopping experience with us is a good one. HAVE A GREAT DAY!
This is an unusual vintage Roping Curb Bit. It is marked Ricardo and Nickel Silver. It has a 5" mouth and is about 9 1/2" in total length. This neat old bit is in good condition and is usable. If you are the winning bidder we ask that you please pay for your item within 3 days of the close of the auction. If you would like to bid on an item but have less that 5 feedback please contact us ahead of time for bidding approval. We usually ship with 3 day of purchase and are happy to combine shipping when possible. Shipping and handling charges include insurance. International Buyers? Please Note: Import duties. Taxes and charges are not included in the item price or shipping costs. These charges are the buyers responsibility. Please check with your country's customs office to determine what these additional costs will be prior to ... morebidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We won't under-value merchandise or mark the item as a gift on the customs forms. Doing that is against U.S. and international laws. Please feel free to ask any questions. We do everything we can to make sure all items are described honestly and accurately. If you have a problem with an item please contact us through e-bay before leaving feedback. We will leave good feedback for anybody that does the same for us. We do all we can to make sure every shopping experience with us is a good one. HAVE A GREAT DAY!
beautifully crafted alpaca cheek pieces. Actually an interchangeable bit! put your mouthpiece of choice on it and have a one of kind showpiece! alpaca is a type of german sliver. i have only seen one other bit like this. very different. Ask if you have questions or need more info. thank. For looking, No international shipping. 48 cont. states only.
Model 1909 US Military bridle used through WWI. Often seen with the McClellan saddle. The bit is solid aand straight, does have expected rusty appearance and some light pitting. It is stamped US clearly on the left. And faintly#3 on the right.
Untitled Document. GREAT OLD CROCKETT RENALDE BIT WITH THE COPPER PORT. MADE BETWEEN 1953-1977. ALL CLEANED UP WITH THE DOME CONCHOS ON THE SIDES. GOOD CURB CHAIN AND LEATHER BRIDLE WITH BRASS BUCKLES AND GOOD REINS.WE ARE STARTING THE AUCTION FOR LESS THAN THE COST OF THE CURB CHAIN. WE APPRECIATE YOUR TIME AND INTEREST. IF YOU LIKE WHAT YOU SEE.PLEASE CHECK OUR FEEDBACKS AND OTHER LISTINGS FOR MORE WESTERN COLLECTIBLES. THANKS FOR LOOKING!
Description Vintage western bridle. Complete set up with an older slit ear in beautiful latigo leather. Horse size with a great deal of adjustment, single buckle, doubled and stitched, like new. Older 5" cutting or reining bit. Low port with curb chain ion great condition. Older dark oil romel reins with lots of braided barrels and knots. Pliable, well used showing some wear to the finish and I do see several broken strands on one rein just above the center. Each rein measures 49" long. Payment due in 7 days. I am happy to combine shipping on multiple wins. Thanks for looking and check out my other items for more work and show equipment including clothing as I continue to clean out the tack room.
Black English Leather Curb Chain. With Lip Strap Ring. Approx. 8" on shortest link. 10 1/2" on longest, so should fit pony to full size. Post free if purchased with bit from my listings.
HISTORICAL HANDMADE MAKER SAM 488 CUTTING WESTERN CURB BIT OUT OF TEXAS* NO RESERVE! Here is a RARE fancy maker marked vintage handmade bit stamped SAM 488. These handmade bits are quite valuable and rare to find used for sale. This was purchased from the estate of an old cutting horse trainer out of Texas. Inlaid sterling bars on shanks with the initial S in silver on each shank. Medium port curb sweet iron mouth to promote acceptance and salvation. Maker marked SAM& 488 on inside shanks. This bit has great balance and some weight to it for that desired quick release to promote lightness. Leather braided shank hobble. This is a rare bit from an old estate, great for training colts. Show, cutting or collecting, it will do nicely which ever direction you decide to take it. Mouthpiece measures 5 inches and shanks 6 7/8 inches from very ... moretop to bottom. Bit is in excellent used vintage condition. Full of history. Please check out my other fine equestrian trappings in my other items for sale. I have over 5500 positive feedback and do my best to make sure my customers are happy! I do combine shipping and insurance is already included. Any questions please just ask. Thank you! WELCOME TO MY AUCTIONS* IF YOU L OVE FINE VINTAGE. CUSTOM AND EXQUISITE TACK OR HIGH QUALITY UNIQUE ITEMS THEN YOU'VE COME TO THE RIGHT PLACE! I HAVE MANY FINE EQUESTRIAN PIECES LISTED IN MY ITEMS FOR SALE SO BE SURE TO TAKE A LOOK. JUST CLICK HERE ON MY! PAYPAL PAYMENTS REQUESTED WITHIN 3 DAYS OF AUCTION. THANK YOU! Please check out my feedback. I want happy customers and will do my best to make sure you are! I mainly sell unique one of a kind items and prefer not to take returns unless there is a misrepresentation on my part. I do my best to describe my items accurately but I am human and do make mistakes so please let me know if you ever have a problem with one of my auctions and I will correct it. Sometimes I am out of town, especially in the summer as it is horse show season, so I may not be able to get back to you
4 3/4" Lemetex A.G. Brand Stainless English Pelham Bit ~ No RESERVE! PLEASE LOOK CLOSELY AT THE PICTURES. READ THE DESCRIPTION S. AND ASK QUESTIONS PRIOR TO BIDDING! ALL ITEMS ARE SOLD AS USED, AS IS” NO REFUNDS. IN ORDER TO AVOID ANY PROBLEMS AT THE TIME OF PAYMENT, PLEASE BE SURE TO READ THE PAYMENT AND SHIPPING INSTRUCTIONS BELOW! BY BIDDING, YOU ARE ENTERING A BINDING PURCHASE AGREEMENT. SHIPPING COSTS ARE CLEARLY QUOTED UNDERNEATH THE CURRENT BID AMOUNT. PLEASE NOTE: RATES HAVE GONE UP. This bit is like new. Very lit tle sign of use. It measure 4 3/4" with a high mullen mouth with lots of to ngue relief. It is marked on the mouth. Lemetex A.G. Stainless Steel. It comes with a dou ble lin k curb cha in( no clips) and a black rolled leather lip strap( new) Check out my other listings for more boots. As I am clearing out a trunk ... moreof boots, also: New Horse Tack, Used Horse Tack, Western Tack, English Tack, and Tack Lots The winning bid is what you make it. The postal costs I have no control over! What you see in the pictures is what you are bidding on. Please verify the measurements you need prior to bidding. THE RISK OF INJURY OR DEATH IS KNOW TO BE INHERENT WITH THE PARTICIPATION OF EQUESTRIAN ACTIVITIES. THE USE OF ANY ITEMS SOLD BY SNOWDENTACK, IS AT THE PURCHASERS' OWN RISK, NO GUARANTEE IS MADE AS TO THE SAFETY AND FUNCTION WHEN APPLIED TO AN ACTIVITY ASSOCIATED WITH HORSES, AGAIN, ITEMS ARE SOLD"AS IS" AS USED Payment I accept Paypal from U.S. Confirmed shipping addresses ONLY, No exceptions! Items will only be shipped to the address provided by Paypal on the payment receipt. If you do not have Paypal. Please contact me prior to bidding, I can also accept U.S. Postal M.O.s Shipping We DO NOT ship international. That includes Canada, No Exceptions! Please note the Postal Rates have gone up! We are located on the East Coast. So bidders located on the West Coast, please take note of shipping costs prior to bidding, we do not profit, but usually take a loss in shipping costs( due to new
Slightly used. Great condition Herrmann Double Rein English Curb Bit, port measures approx 1" cheek piece is 5 3/4" d-ring are 2 1/2" Chain length approx 7" rings all measure 1" sp#6
Selling from the barn again! My dad had alot of western gear. Yet I don't know much about it. I have a few books and look around on the internet. I like this bit because it's got some beautiful etching on it and is marked COLO. BIT& SPUR. I think it's aluminum but has a silver color to it. Seems to have some age to me. Shanks are 6 1/2" long and it's 5 1/8" wide for mouth. Please make an offer! I have 100% feedback and want to keep it. I will insure and signature confirm the shipping.